The WS-5 is designed to work without configuration, but a few habits on the first setup will save you troubleshooting later. Here is the full process, start to finish.
Step 1: charge both units fully before first use
Both the transmitter and receiver have built-in rechargeable batteries. Charge both completely before your first session so you have a full runtime baseline to judge future performance against.
Step 2: plug the receiver in at the front of your chain
The receiver goes exactly where your instrument cable currently plugs in: into your amp input, or into the first pedal on your board. No routing changes are needed.
Step 3: mind receiver placement
This is the step that prevents most future problems. Position the receiver where it has a clear line to where you'll be standing. Avoid burying it under a pedalboard, placing it directly against a metal chassis, or sitting it next to a Wi-Fi router or power supply.
Step 4: plug the transmitter into your instrument
The transmitter connects to your guitar or bass output jack. On instruments with a recessed or angled jack plate, check that it seats fully and hangs at a natural angle without strain on the jack.
Step 5: power on and let it pair
The WS-5 auto-pairs, so there are no menus, apps, or channel selections to work through. Power both units on and give it a moment to establish the link.
Step 6: match your levels to your cable
Before you commit, play through your cable, note your amp settings, then switch to the WS-5 and confirm the signal level and tone match. This is your baseline and your tone parity check in one step.
Step 7: walk your space
Before relying on it at a gig, power it on in the actual venue and walk the full area you plan to cover. This catches venue-specific conditions that no home test can predict.
Frequently asked questions
Does the WS-5 need an app or pairing setup?
No. It auto-pairs with no menus or configuration required.
Where should the receiver go?
At the front of your signal chain, positioned with a clear line to where you play and away from routers and power supplies.
How do I know it's set up correctly?
A direct A/B against your cable at identical amp settings should sound and level-match.
Get the ToneLink WS-5, backed by a 60-day trial and 2-year warranty.
0 comentários