ToneLink™ WS-X Wireless Mic System

$149.00 USD

ToneLink™ WS-X Wireless Mic System

60-Day Risk-Free Trial & 2-Year Warranty

ToneLink™ WS-X Wireless Mic System

Name: ToneLink™ WS-X Wireless Mic System
Brand: ToneLink
SKU: WSX-XLR-Black
Price: 149.00 USD
Availability: OutOfStock

🎙️ Turns Any XLR Mic Wireless

⚡ 48V Phantom Mode For Condensers

🔋 8–10 Hours Per Charge, USB-C

📡 100+ ft Range, UHF Dual Antennas

Two units, no cable between them:

Transmitter on the mic: plug it straight into the XLR base of your microphone.
Receiver on the desk: plug it into the XLR input on your mixer, interface, or powered speaker.
Pick your mode: Mic for dynamics, 48V for condensers, Music for line-level sources.
Power on and go: the pair syncs on its own. The OLED screen shows your channel, volume and battery at a glance.

Nothing to install, no app, no cable run across the floor.

The WS-X works with any microphone that ends in a standard 3-pin XLR connector. Handheld dynamics like an SM58, condensers that need 48V phantom power, and line-level XLR sources are all covered by the three switchable modes.

On the receiving end it plugs into mixers, audio interfaces, powered speakers, PA systems, and field recorders with an XLR input.

Please note: the microphone itself is not included. The WS-X makes the mic you already own wireless.

We back the ToneLink WS-X with a 60-day risk-free trial and a 2-year warranty. Run it at real rehearsals, real services, real recording sessions. If it is not right for you, return it within 60 days for a full refund. No restocking fees, no questions.

Why Go Wireless

The Cable Is The Weakest Part Of Your Mic

You bought a good microphone. Then you plugged it into a twenty-foot cable that gets stepped on, coiled wrong, yanked off the stand, and tugged out of the mixer halfway through a take. The mic is not what fails. The cable is.

The WS-X removes it. The transmitter screws onto the base of the mic you already own, the receiver sits in your mixer, and the signal travels over UHF with dual built-in antennas for 100+ ft line of sight. Three modes cover what you plug in: Mic for dynamics, 48V for condensers, Music for line-level sources.

The microphone you trust does not change. Everything between it and the desk does.

Wireless In About 30 Seconds

No app, no menus, no cable across the floor.

1

Screw the transmitter onto your mic

It goes straight into the XLR base of the microphone you already own. Nothing to unscrew, nothing to rewire.

2

Plug the receiver into your mixer

Any XLR input works: mixer, audio interface, powered speaker, PA, field recorder.

3

Pick your mode and go

Mic for dynamics, 48V for condensers, Music for line-level. The pair syncs on its own and the screen shows channel, volume and battery.

12,000+

Systems delivered

1,000+

Verified customer reviews

60-Day

Risk-free trial + 2-year warranty

How The WS-X Compares

	ToneLink WS-X	Xvive U3 / U3C	Sennheiser XSW-D	No-name budget systems
Price	$149	$219.99 (U3) / $239.99 (U3C)	$349	$40 to $100
Dynamic microphones	Yes	Yes	Yes	Yes
Condenser mics, 48V phantom	Yes, built into the same unit	Only on the separate U3C	Not on the base set	Rarely
Frequency band	UHF	2.4GHz, shared with WiFi	2.4GHz, shared with WiFi	Usually 2.4GHz
Range, line of sight	100+ ft	Up to 90 ft	Up to 250 ft	Often unspecified
Battery per charge	8 to 10 hours	Up to 5 hours	Up to 5 hours	Often unspecified
Microphone included	No, use your own	No, use your own	No, use your own	No, use your own

Xvive and Sennheiser figures come from the manufacturers' own listings, August 2026; the Sennheiser column is the XSW-D XLR Base Set. The final column describes the unbranded systems widely sold on marketplaces, which vary from seller to seller.

Frequently asked questions

No, and that is the point. The WS-X is a transmitter and receiver pair that makes the microphone you already own wireless. Keep the mic you know and trust, lose the cable.

Yes. Switch the transmitter to 48V mode and it supplies phantom power to the microphone. Most wireless XLR adapters in this price range are dynamic-only, or sell the condenser version separately. The WS-X covers both.

100+ feet line of sight. Dual built-in antennas keep the link steady across a stage, a sanctuary, or a conference room. Walls and bodies between the two units will shorten that, as they do with any wireless system.

A 1000mAh rechargeable battery in each unit runs roughly 8 to 10 hours per charge, so a full day of services, sessions or rehearsals fits on one charge. Both units recharge over USB-C, and can run while plugged in.

Yes. The frequency is adjustable on the unit, shown on the OLED screen, so each pair can sit on its own channel. Set every transmitter and receiver pair to a different frequency and they will not interfere with each other.

Anywhere an XLR cable is in the way. Podcasting and streaming, houses of worship, conferences and presentations, video and field recording, karaoke and PA setups, and amp or instrument miking where you do not want a cable run across the room.

The wireless XLR transmitter, the wireless XLR receiver, a USB-C charging cable, and a user manual. Microphone not included.

The big one is condenser support. The Xvive U3 handles dynamic mics only — condensers need the separate U3C model — and the Sennheiser XSW-D base set is dynamic-only too. The WS-X does both from one unit with a 48V phantom mode you switch on the transmitter. It also runs 8 to 10 hours against about 5 for either, on UHF rather than the crowded 2.4GHz band, at $149.

🛡️

Try It On Your Own Mic, Or Send It Back

Put the WS-X on the microphone you already own and run it for 60 days. Real rehearsals, real services, real sessions. If it does not hold up the way a cable would, return it for a full refund. No restocking fees, no forms, no questions. A 2-year warranty covers it after that.

Try The WS-X Risk-Free