ToneLink™ WS-X Wireless Mic System
Black
Sale price
$179.00 USD
Regular price
$229.00 USD
Skip to product information
60-Day Risk-Free Trial & 2-Year Warranty
60-Day Risk-Free Trial & 2-Year Warranty
ToneLink™ WS-X Wireless Mic System
Sale price
$179.00 USD
Regular price
$229.00 USD
Turns Your XLR Dynamic Mic Wireless
Under 3 ms Latency, Studio-Clear 24-bit Sound
6 to 8 Hours Per Charge
Up to 90 ft Range, 20+ Channels
Plugs Into Any Mixer, PA or Recorder
How It Works
Two units, no cable between them.
- Transmitter on the mic. Plug it straight into the XLR base of your dynamic microphone.
- Receiver on your mixer. Plug it into the XLR input on your mixer, PA system or recorder.
- Set your input. Choose Mic for your vocal mic. Choose Line for keyboards, backing tracks and other line-level sources.
- Power on and go. Charge both units, switch them on and you are ready to play. The built-in screen shows your settings at a glance.
Nothing to install, no app, no cable run across the floor.
Compatibility
Works with XLR dynamic microphones, including most handheld and stage vocal mics.
Dynamic micsKeyboardsBacking tracksMixersPA systems
Ribbon microphones: we do not recommend them. Phantom power can damage them.
Our Guarantee
Zero Risk
Every WS-X comes with a 60-day risk-free trial and a 2-year warranty. Run it at real rehearsals, real services, real recording sessions.
- Not right for you? Return it within 60 days for a full refund.
- No restocking fees, no questions.
Why Go Wireless
The Cable Is The Weakest Part Of Your Mic
You bought a good microphone. Then you plugged it into a twenty-foot cable that gets stepped on, coiled wrong, yanked off the stand, and tugged out of the mixer halfway through a take. The mic is not what fails. The cable is.
The WS-X removes it. The transmitter plugs onto the base of the XLR dynamic mic you already own, the receiver sits in your mixer, and the signal travels over UHF for up to 90 ft line of sight. Two modes cover what you plug in: Mic for dynamic microphones and Music for line-level sources.
The microphone you trust does not change. Everything between it and the desk does.
Wireless In About 30 Seconds
No app, no menus, no cable across the floor.
1
Screw the transmitter onto your mic
It goes straight into the XLR base of the microphone you already own. Nothing to unscrew, nothing to rewire.
2
Plug the receiver into your mixer
Any XLR input works: mixer, audio interface, powered speaker, PA, field recorder.
3
Pick your mode and go
Mic for dynamics, Music for line-level. The pair syncs on its own and the screen shows channel, volume and battery.
1,564+
Systems delivered
60-Day
Risk-free trial + 2-year warranty
How The WS-X Compares
| Feature | ToneLink WS-X | Xvive U3 / U3C | Sennheiser XSW-D | No-name budget systems |
|---|---|---|---|---|
| Price | $179 | $219.99 (U3) / $239.99 (U3C) | $349 | $40 to $100 |
| Dynamic microphones | Yes | Yes | Yes | Yes |
| Frequency band | UHF | 2.4GHz, shared with WiFi | 2.4GHz, shared with WiFi | Usually 2.4GHz |
| Range, line of sight | Up to 90 ft | Up to 90 ft | Up to 250 ft | Often unspecified |
| Battery per charge | 6 to 8 hours | Up to 5 hours | Up to 5 hours | Often unspecified |
| Microphone included | No, use your own | No, use your own | No, use your own | No, use your own |
Xvive and Sennheiser figures come from the manufacturers' own listings, August 2026; the Sennheiser column is the XSW-D XLR Base Set. The final column describes the unbranded systems widely sold on marketplaces, which vary from seller to seller.
WS-X FAQ
Questions People Ask
Is a microphone included?
No, and that is the point. The WS-X makes the dynamic microphone you already own wireless.
- A transmitter and receiver pair
- Keep the mic you know and trust, lose the cable
Does it work with condenser mics?
Not at this time. The WS-X is built for XLR dynamic microphones.
- Condenser support is still being verified, so please email us before you buy if you plan to use one.
- Ribbon microphones are not supported. Phantom power can damage them, so never connect one to a phantom-powered input.
How far can I walk?
Up to 90 feet line of sight.
- UHF signal keeps the link steady across a stage, a sanctuary or a conference room.
- Walls and bodies between the two units will shorten that, as they do with any wireless system.
How long does the battery last?
About 6 to 8 hours per charge, so a full day of services, sessions or rehearsals fits on one charge.
- Rechargeable battery in each unit
- Both units can run while charging
Can I run more than one system?
Yes. Give each pair its own channel.
- The frequency is adjustable on the unit and shown on the OLED screen.
- Set every transmitter and receiver pair to a different frequency and they will not interfere with each other.
What is it good for?
Anywhere an XLR cable is in the way.
- Podcasting and streaming
- Houses of worship
- Conferences and presentations
- Video and field recording
- Karaoke and PA setups
- Amp or instrument miking, without a cable run across the room
What is in the box?
Two units, a cable and a manual. Microphone not included.
- Wireless XLR transmitter
- Wireless XLR receiver
- Charging cable
- User manual
WS-X vs Xvive or Sennheiser?
The big differences are range, battery and the radio band.
- The WS-X runs 6 to 8 hours per charge, against about 5 for either.
- It uses UHF rather than the crowded 2.4GHz band.
- It has 20+ channels so several systems can run side by side.
- All at $179.
What if I don't love it?
You risk nothing. Return it within 60 days for a full refund.
- Try it at real rehearsals, real services and real recording sessions
- No restocking fees, no questions
- 2-year warranty
Still have questions? info@tonelink.co
60
Days
Try It On Your Own Mic, Or Send It Back
Put the WS-X on the microphone you already own and run it for 60 days. Real rehearsals, real services, real sessions. If it does not hold up the way a cable would, return it for a full refund. No restocking fees, no forms, no questions. A 2-year warranty covers it after that.